14 November 2014

First "Week" of Juggernaut Wrapped Up

uggernaut Accumulation phase numero uno is in the books.

Juggernaut is programmed as "waves" based on the prescribed base rep scheme for work sets. Each wave is then broken into phases. The four phases are Accumulation, Intensification, Realization, a la block periodization, followed by a deload phase. In a four day/week program, a phase would last a week. I am currently programming it as three days a week, or a roughly nine to ten day phase.

As mentioned previously, I decided to give The Juggernaut Method a try after analyzing my own issues with ever so briefly perusing its digital pages and reading some of the articles on their site, it looked like a well programmed way to apply some more volume to my training. While I heart the ol' block periodization, my previous programming protocol, I realized several weeks ago that I really wasn't ready for it. While I got a little better with the shoulder, etc, I lost way too much strength during that downtime- and that is not just with pressing. Everything suffered. Squats are crap, pulls are crap, conditioning and work capacity are crap. 

In short, I am not ready for a meet. 

Maybe meat, but not meet. 

And at least so far, Juggernaut feels like it will help quite a bit with restoring all of that stuff above.

Stuff. Yes, that's science.

So anyhoo, onto the work:



10s wave, Accumulation 1: Skeeeeeeeeeeeeeeeeeeeeeewat Day

  • warm up, about 10min
  • Squat - warm up sets, working sets: 8s 5r, 1s 3r @ 210lbs (should have been 10s 5r) - 90 second rest periods
  • X walks - 5s 10yds each direction w/ EliteFTS red mini Pro band, 90 second rest periods
  • Seated hip abductions - 5s 10r w/ doubled over red band, 90 second rest periods

Good times. One thing you should notice is the sets/reps on this week- the prescribed work under standard Juggernaut method should be five sets of 10 repetitions at 60% of your training max (training max = 90% of your one rep max, a la 5/3/1) BUT I strained (popped?) something in my right quad on rep three of the ninth set just coming out of the hole and got put back down in the hole. I finished the rep, but the remainder of the set and all of the next set just weren't happening. Tried to roll it and stretch it out, but to no avail. Walked around for a bit to try to keep it warm, hit the accessory work, stretched a bit more, and called it a day. 

As mentioned in the previous post, my warm up apparently needs to be more thorough. Between the quad strain and the DOMS that followed for the next three to four days, it was no bueno. In memes, this translates to:











You get the point.

BUT I can say that the work itself felt good, and while one can obviously dictate rest periods themselves, having them built into the program is pretty great. As stated, one of my issues as a lifter in general is work capacity, and the built in short rest periods help that.

Sometimes, you just have to be told what to do.



10s wave, Accumulation 2: Bench Day

All work done with approximately 90 second rest periods between sets:
  • warm up and band traction, about 10 min 
  • Bench - worked up to 10s 5r @ 120lbs
  • Incline dumbbell bench - 5s 10r @ 40lbs
  • Lat pulldown, paused - 5s 10r @ 100lbs
  • Band pull aparts - 5s 10r w/ EliteFTS red mini Pro band
Not much to report on this one. Good sesh, work felt good. I DID forget an important aspect of Juggernaut on this sesh and the following deadlift sesh - the idea that one should exceed the prescribed reps on the last set, leaving 2-3 in the tank on your first "week" of the wave, so I did just the prescribed reps.

Still, good times, and it felt good working at that repetition and feeling technique (bar path, touch point, etc) becoming more consistent.

Metal break.






10s wave, Accumulation 3: Deathlift Day

This one was a bit rushed, and I am still not 100% set on accessory work, so required work was about it for the day.

  • Warm up, about 10min
  • Box jumps - 5s 5r
  • Deadlift, sumo - worked up to 5s 5r @ 215lbs, 5s 5r @ 220lbs, 90 second rest periods

One of the gym bros needed to work in, so we ran with his working weight for the last few sets. Past that, I honestly don't remember what I did for accessory work.

And as mentioned, forgot to get the "+" on the last set.

That said, another positive with this volume of work, especially at a consistent weight, is that you can really work on technique. Much as I got to work path and touch point on bench day, I worked on consistently setting up, opening my hips, and getting my pull point locked in. I have a tendency of slowly transitioning over to pulling with my back instead of my legs during high volume deadlift work, so I was working to actively counter that.

Quoth David, "Can you store a lot of water in that hump?"

Ha ha. You funny I forgot to raff.

OKAY, SO MAYBE MY FORM ISN'T PERFECT, BUT I'M NOT THE ONE LISTENING TO BOBAFLEX, DAVID!

ahem.




Yeah.

Just for that, I have to purge somehow.

Ah, yes.

I have the perfect remedy for Bobaflex.




Whew. All better.



10s wave, Accumulation 4: Press Day

Not much exciting here, just a press day. Press is my weakest comparative lift (even worse than my bench), so I am excited to have a day dedicated to it. Should be some good work happening here in the future.

  • Warm up, stretch, traction - about 15min
  • OHP, strict - 9s 5r @ 80lbs, 6r @ 80lbs
  • Klokov press - 5s 10r @ 65lbs
  • Tbar row, slow - 5s 10r @ 45lbs
  • Band pull aparts - 4s 15r w/ EliteFTS red mini Pro band

All working and accessory sets done on 2 min cycle times

I remembered to get my extra work in on the last working set - only one extra rep. Ever since my upper back/shoulder injury and my subsequent lack of consistent rehab work I fatigue easily on overhead work. This is yet another area I hope to make strides on with this program as I know I need the improvement.

And who doesn't love overhead work?

Fascists and pedophiles, that's who.

And don't you forget it.

Go forth and press for freedom.

No comments: